LSR - P1 - sports racer
Posted: Fri Apr 25, 2025 1:25 pm
LSR-II for sale.
One of only 2 made, this one was originally delivered to Bob Townsend in Australia. It came back to the US and was last driven at the 2019 VIR runoffs by Glen Cooper and has been in storage since. It is currently located at Hurley Racing Products in Michigan..
This car started life as a Van Diemen RF-95, the chassis was modified for the 07/08 GSXR at HRP, everything aft of the roll hoop was designed and fabricated at HRP. The uprights are from the original RF95. The front shock locations have been moved above the chassis for easier access and service similar to the RF98’s. Motion ratios were increased from the original FC spec to accommodate the additional downforce.
845#’s as shown with bodywork and with some fuel.
07/08 GSXR by GDRE
2 sets of Jongbloed 3 pc wheels
Aim MXL Dash
Shock pots on all 4 corners
All Carbon Fiber body, floors tunnel, splitter and wings.
The tunnels were originally designed to be DSR legal, now P1 legal.
All the molds are still here at HRP.
$35,000.00 OBO
More images here:
https://www.dropbox.com/scl/fo/zuesgvrt ... qfgid&dl=0
One of only 2 made, this one was originally delivered to Bob Townsend in Australia. It came back to the US and was last driven at the 2019 VIR runoffs by Glen Cooper and has been in storage since. It is currently located at Hurley Racing Products in Michigan..
This car started life as a Van Diemen RF-95, the chassis was modified for the 07/08 GSXR at HRP, everything aft of the roll hoop was designed and fabricated at HRP. The uprights are from the original RF95. The front shock locations have been moved above the chassis for easier access and service similar to the RF98’s. Motion ratios were increased from the original FC spec to accommodate the additional downforce.
845#’s as shown with bodywork and with some fuel.
07/08 GSXR by GDRE
2 sets of Jongbloed 3 pc wheels
Aim MXL Dash
Shock pots on all 4 corners
All Carbon Fiber body, floors tunnel, splitter and wings.
The tunnels were originally designed to be DSR legal, now P1 legal.
All the molds are still here at HRP.
$35,000.00 OBO
More images here:
https://www.dropbox.com/scl/fo/zuesgvrt ... qfgid&dl=0